{"lien_WSTV":"","tax_name":"deprecated","tax_rate":20,"id_manufacturer":"0","id_supplier":"0","id_category_default":"598","id_shop_default":"1","manufacturer_name":false,"supplier_name":false,"name":"RM 52-01 Tourbillon Skull Nano Ceramique","description":"The RM 52-01 Skull is a new timepiece that confirms the brand\u2019s creative freedom. Following in the footsteps of the RM 052, it is the second piece in the Skull collection launched in 2012, and features the skull design that has come to symbolise the Richard Mille brand: an anti-conformist approach focused on creativity and development, where each new timepiece embodies a call for a watchmaking revolution. This model stands out both for its choice of materials and the way it has been crafted. <br \/><br \/>The RM 52-01 Skull is equipped with the RM052 manual winding tourbillon caliber built on a baseplate in PVD-treated grade 5 titanium. The PVD-treated titanium provides excellent rigidity and perfectly flat surfaces, and has been subjected to a range of tests before being approved. But that is where comparisons with the RM 052 end: the skull and back of the skull are now sculpted from 5N red gold and are hand-bevelled. For the case, Richard Mille has used an unprecedented composite material known as nano-ceramic. <br \/><br \/>Following research on the bezels of the RM 055 and RM 011 Silicon Nitride, the Jura-based watchmaker has developed advanced expertise in ceramics, excellent skills in the design of complex shapes and, most importantly, has managed to produce ceramics of unrivalled quality by reducing the porosity of the raw material.<br \/><br \/>TZP was chosen for the RM 52-01\u2019s bezel and case back. This low-density material (6 g.cm3) is highly scratch-resistant and has a low thermal conductivity coefficient. Made from 95% yttrium-stabilised zirconium, TZP has a pronounced grain that provides the perfect finish. The bezel and case back can therefore be microblasted and the corners hand-polished. <br \/><br \/>For the case middle, Richard Mille decided to use carbon nanotubes for their proven ability to protect the tourbillon movement nestled in the centre against impacts. Bonded to a black polymer, the carbon nanotube case middle helps to reduce the watch\u2019s weight. <br \/><br \/>The three-part case is very light and jet-black in colour. It is assembled using an average of 20 spline screws in grade 5 titanium. The DLC-treated torque-limiting crown provides the finishing touch. <br \/><br \/>The RM 52-01 is released as a limited edition of 30 nano-ceramic timepieces featuring an 18K red-gold skull.","description_short":"","quantity":0,"minimal_quantity":"1","available_now":"","available_later":"","price":507500,"specificPrice":false,"additional_shipping_cost":"0.00","wholesale_price":"0.000000","on_sale":"0","online_only":"0","unity":"","unit_price":0,"unit_price_ratio":"0.000000","ecotax":"0.000000","reference":"","supplier_reference":"","location":"","width":"0.000000","height":"0.000000","depth":"0.000000","weight":"0.000000","ean13":"","upc":"","link_rewrite":"rm-52-01-tourbillon-skull-nano-ceramique","meta_description":"The RM 52-01 Skull is a new timepiece that confirms the brand\u2019s creative freedom. Following in the footsteps of the RM 052, it is the second piece in the Sku...","meta_keywords":"","meta_title":"Watch Richard Mille RM 52-01 Tourbillon Skull Nano Ceramique | RM 52 TZP Ceramic and Carbon Nanotubes - Rubber Bracelet","quantity_discount":"0","customizable":"0","new":false,"uploadable_files":"0","text_fields":"0","active":"1","redirect_type":"","id_product_redirected":"0","available_for_order":"0","available_date":"0000-00-00","condition":"new","show_price":"1","indexed":"1","visibility":"both","date_add":"2015-08-03 22:47:21","date_upd":"2015-09-30 13:40:41","tags":false,"base_price":"507500.000000","id_tax_rules_group":"1","id_color_default":0,"advanced_stock_management":"0","out_of_stock":0,"depends_on_stock":false,"isFullyLoaded":true,"cache_is_pack":"0","cache_has_attachments":"1","is_virtual":"0","id_pack_product_attribute":null,"cache_default_attribute":"0","category":"rm-52","pack_stock_type":"3","id":4581,"id_shop_list":null,"force_id":false,"customization_required":false}
{"Compl\u00e9ment":"TZP Ceramic and Carbon Nanotubes - Rubber Bracelet","Statut de vente":"En vente depuis","Date":"2013","Pi\u00e8ce unique":"No","S\u00e9rie limit\u00e9e":"Oui","Nombre d exemplaire":"30","Sexe":"Homme","Gaucher":"No","Hauteur":"50","Largeur":"42.7","Epaisseur":"15.95","Types":"Hand-winding","Styles":"Atypical, High Horology","Calibre_autre":"RM052","Calibre distinction_autre":"Hand-polished bevelling, Titanium bridges, Hand-bevelled skull sculpted from red gold","Affichage":"Luminescent hands","Affichage_autre":"Skeleton","Complication":"Skeleton, Tourbillon","Mati\u00e8re du bo\u00eetier":"Black ceramic","Mati\u00e8re du bo\u00eetier_autre":"TZP","Particularit\u00e9 du boitier":"Sapphire caseback, Traitement antireflet","Particularit\u00e9 du boitier_autre":"TZP Bezel and Caseback, Dynamometric crown","Etanch\u00e9it\u00e9":"50 meters","Forme":"Tonneau","Index":"Luminescent, Dots","Verre":"Sapphire, Antireflective coating","Mati\u00e8re du bracelet":"Rubber","Couleur du bracelet":"Black","Plus de caract\u00e9ristiques":"<strong>MOVEMENT<\/strong><br \/>Circa 48 hours (\u00b110%)<br \/>Free sprung balance with variable inertia<br \/>Fast rotating barrel<br \/>Barrel pawl with progressive recoil<br \/>Winding barrel teeth and centre-wheel pinion with central involute profile<br \/>spline screws in grade 5 titanium for the bridges<br \/><br \/>Movement dimensions: 32.80 mm x 30.90 mm <br \/>Thickness: 6.87 mm <br \/>Tourbillon diameter: 10.90 mm <br \/>Balance wheel diameter: 9.12 mm <br \/>Number of jewels: 19 <br \/>Balance wheel: Glucydur. 2 arms. 4 adjustment screws <br \/>Moment of inertia: 11.50 mg.cm2. angle of lift 53\u00b0 <br \/>Frequency: 21.600 vph (3 Hz) <br \/>Balance spring: in ELINVAR by Nivarox\u00ae <br \/>Shock protection: KIF ELASTOR by KE 160 B28 <br \/>Barrel arbor: in nickel-free Chronifer (DIN x 46 Cr13 + S). with the following characteristics: stainless. non-magnetic. tempered<br \/><br \/><strong>CASE<\/strong><br \/>Upper flange in carbon. lower flange in grade 5 titanium with DLC coating<br \/>20 spline screws in grade 5 <br \/>titanium"}
MOVEMENT Circa 48 hours (±10%) Free sprung balance with variable inertia Fast rotating barrel Barrel pawl with progressive recoil Winding barrel teeth and centre-wheel pinion with central involute profile spline screws in grade 5 titanium for the bridges
Movement dimensions: 32.80 mm x 30.90 mm Thickness: 6.87 mm Tourbillon diameter: 10.90 mm Balance wheel diameter: 9.12 mm Number of jewels: 19 Balance wheel: Glucydur. 2 arms. 4 adjustment screws Moment of inertia: 11.50 mg.cm2. angle of lift 53° Frequency: 21.600 vph (3 Hz) Balance spring: in ELINVAR by Nivarox® Shock protection: KIF ELASTOR by KE 160 B28 Barrel arbor: in nickel-free Chronifer (DIN x 46 Cr13 + S). with the following characteristics: stainless. non-magnetic. tempered
CASE Upper flange in carbon. lower flange in grade 5 titanium with DLC coating 20 spline screws in grade 5 titanium
DESCRIPTION
The RM 52-01 Skull is a new timepiece that confirms the brand’s creative freedom. Following in the footsteps of the RM 052, it is the second piece in the Skull collection launched in 2012, and features the skull design that has come to symbolise the Richard Mille brand: an anti-conformist approach focused on creativity and development, where each new timepiece embodies a call for a watchmaking revolution. This model stands out both for its choice of materials and the way it has been crafted.
The RM 52-01 Skull is equipped with the RM052 manual winding tourbillon caliber built on a baseplate in PVD-treated grade 5 titanium. The PVD-treated titanium provides excellent rigidity and perfectly flat surfaces, and has been subjected to a range of tests before being approved. But that is where comparisons with the RM 052 end: the skull and back of the skull are now sculpted from 5N red gold and are hand-bevelled. For the case, Richard Mille has used an unprecedented composite material known as nano-ceramic.
Following research on the bezels of the RM 055 and RM 011 Silicon Nitride, the Jura-based watchmaker has developed advanced expertise in ceramics, excellent skills in the design of complex shapes and, most importantly, has managed to produce ceramics of unrivalled quality by reducing the porosity of the raw material.
TZP was chosen for the RM 52-01’s bezel and case back. This low-density material (6 g.cm3) is highly scratch-resistant and has a low thermal conductivity coefficient. Made from 95% yttrium-stabilised zirconium, TZP has a pronounced grain that provides the perfect finish. The bezel and case back can therefore be microblasted and the corners hand-polished.
For the case middle, Richard Mille decided to use carbon nanotubes for their proven ability to protect the tourbillon movement nestled in the centre against impacts. Bonded to a black polymer, the carbon nanotube case middle helps to reduce the watch’s weight.
The three-part case is very light and jet-black in colour. It is assembled using an average of 20 spline screws in grade 5 titanium. The DLC-treated torque-limiting crown provides the finishing touch.
The RM 52-01 is released as a limited edition of 30 nano-ceramic timepieces featuring an 18K red-gold skull.
The RM 52-01 Skull is a new timepiece that confirms the brand’s creative freedom. Following in the footsteps of the RM 052, it is the second piece in the Skull collection launched in 2012, and features the skull design that has come to symbolise the Richard Mille brand: an anti-conformist approach focused on creativity and development, where each new timepiece embodies a call for a watchmaking revolution. This model stands out both for its choice of materials and the way it has been crafted.
The RM 52-01 Skull is equipped with the RM052 manual winding tourbillon caliber built on a baseplate in PVD-treated grade 5 titanium. The PVD-treated titanium provides excellent rigidity and perfectly flat surfaces, and has been subjected to a range of tests before being approved. But that is where comparisons with the RM 052 end: the skull and back of the skull are now sculpted from 5N red gold and are hand-bevelled. For the case, Richard Mille has used an unprecedented composite material known as nano-ceramic.
Following research on the bezels of the RM 055 and RM 011 Silicon Nitride, the Jura-based watchmaker has developed advanced expertise in ceramics, excellent skills in the design of complex shapes and, most importantly, has managed to produce ceramics of unrivalled quality by reducing the porosity of the raw material.
TZP was chosen for the RM 52-01’s bezel and case back. This low-density material (6 g.cm3) is highly scratch-resistant and has a low thermal conductivity coefficient. Made from 95% yttrium-stabilised zirconium, TZP has a pronounced grain that provides the perfect finish. The bezel and case back can therefore be microblasted and the corners hand-polished.
For the case middle, Richard Mille decided to use carbon nanotubes for their proven ability to protect the tourbillon movement nestled in the centre against impacts. Bonded to a black polymer, the carbon nanotube case middle helps to reduce the watch’s weight.
The three-part case is very light and jet-black in colour. It is assembled using an average of 20 spline screws in grade 5 titanium. The DLC-treated torque-limiting crown provides the finishing touch.
The RM 52-01 is released as a limited edition of 30 nano-ceramic timepieces featuring an 18K red-gold skull.
TZP Ceramic and Carbon Nanotubes - Rubber Bracelet
On sale :
2013
List Price :
609 000 €
Height :
50 mm
Width :
42.7 mm
Thickness :
15.95 mm
Styles :
Atypical High Horology
Types :
Hand-winding
Calibre :
RM052
Calibre distinction :
Hand-polished bevelling Titanium bridges Hand-bevelled skull sculpted from red gold
Complication :
Skeleton Tourbillon
Case material :
Black ceramic
TZP
Case peculiarity :
Sapphire caseback Traitement antireflet
TZP Bezel and Caseback Dynamometric crown
Shape :
Tonneau
Water-resistance :
50 meters
Display :
Luminescent hands
Skeleton
Indexes :
Luminescent Dots
Glass :
Sapphire Antireflective coating
Strap material :
Rubber
Strap color :
Black
More characteristics :
MOVEMENT Circa 48 hours (±10%) Free sprung balance with variable inertia Fast rotating barrel Barrel pawl with progressive recoil Winding barrel teeth and centre-wheel pinion with central involute profile spline screws in grade 5 titanium for the bridges
Movement dimensions: 32.80 mm x 30.90 mm Thickness: 6.87 mm Tourbillon diameter: 10.90 mm Balance wheel diameter: 9.12 mm Number of jewels: 19 Balance wheel: Glucydur. 2 arms. 4 adjustment screws Moment of inertia: 11.50 mg.cm2. angle of lift 53° Frequency: 21.600 vph (3 Hz) Balance spring: in ELINVAR by Nivarox® Shock protection: KIF ELASTOR by KE 160 B28 Barrel arbor: in nickel-free Chronifer (DIN x 46 Cr13 + S). with the following characteristics: stainless. non-magnetic. tempered
CASE Upper flange in carbon. lower flange in grade 5 titanium with DLC coating 20 spline screws in grade 5 titanium
