RM 16-01 Automatic Réglisse

Brand  : Richard Mille
Collection  : RM 16
Model  : RM 16-01 Automatic Réglisse
Reference  :
Complement : TZP ceramic - Saphir - Rubber Strap

PDF INDEX CARD

REQUEST A PRICE

Price request for RM 16-01 Automatic RéglisseRef.

RM 16-01 Automatic Réglisse

YOU WANT IT ? WE SEARCH IT !

This fonction is reserved for exclusive members of MyWatchSite.

There is nothing easier than becoming a member!

  • Brand  : Richard Mille
    Collection  : RM 16
    Model  : RM 16-01 Automatic Réglisse
    Reference  :
    Complement : TZP ceramic - Saphir - Rubber Strap
    List Price : On request
    Height : 50.20 mm
    Width : 38.00 mm
    Thickness : 9.88 mm
    Styles : Atypical
    High Horology
    Types : Self-winding
    Calibre distinction : Skeleton
    Variable-geometry rotor
    Complication : Skeleton
    Case material : Carbon
    Carbon TPT®
    Quartz TPT®
    Case peculiarity : Sapphire caseback
    Shape : Tonneau
    Water-resistance : 50 meters
    Dial : Lacquered
    Hand painted
    Skeleton
    Enamelled
    Titanium
    Display : Luminescent hands
    Glass : Antireflective coating
    Sapphire
    Strap material : Rubber
    + More characteristics :
    Movement
    CALIBRE RM16-01: Skeletonised automatic-winding movement with hours, minutes, date and adjustable rotor geometry.
    POWER RESERVE: Circa 55 hours (±10%).
    BASEPLATE AND BRIDGES MADE OF GRADE 5 TITANIUM
    DATE DISPLAY
    FREE-SPRUNG BALANCE WITH VARIABLE INERTIA
    VARIABLE-GEOMETRY ROTOR
    DOUBLE-BARREL SYSTEM
    SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE
    - Movement dimensions: 30.25 x 28.45 mm
    - Thickness: 4.44 mm
    - Jewels: 32
    - Barrel arbour: in AP 20 steel
    - Balance: Glucydur®, 4 arms, moment of inertia 4.8 mg•cm2, angle of lift 53°
    - Frequency: 28,800 vph (4 Hz)
    - Balance spring: elinvar by Nivarox®
    - Shock protection: INCABLOC 908.22.211.100 (transparent)
    - Escapement wheel jewels: Rubifix (transparent)
    - Three-position stem: Manual winding, date, time setting

    Case
    TZP ceramic

    Dial
    In grade 5 titanium with grey Titalyt® treatment
    Thickness: 1.40 mm

    CRYSTAL
    Bezel side: in sapphire (1,800 Vickers) with anti-glare treatment (2 sides)
    Thickness: 1.15 mm
    Caseback: in sapphire with anti-glare treatment (2 sides)
    Thickness: at the center 0.67 mm and outer edges 1.05 mm

    FINISHING
    MOVEMENT
    - Baseplate and bridges in hand-ground grade 5 titanium, wet sandblasted, electroplasma treated or Titalyt® treated
    - Burnished pivots
    - Sandblasted bridges
    - Diamond-polished sinks on the bridge side

    STEEL PARTS
    - Sapphire-blasted surfaces
    - Anglage and polishing by hand
    - Screw slot and screws bevelled and polished with rounded and polished tip

    WHEELS
    - Sandblasted and rhodium-plated, bevelled wheels (before cutting the teeth)
    - Minimal corrections applied to the wheels in order to preserve geometry and performance

DESCRIPTION

  • A REBELLIOUS COLLECTION IN ACID-BRIGHT COLOURS


    Richard Mille has bitten into a juicy new realm of graphic, emotional and chromatic expression. The Richard Mille Bonbon Collection comprises 10 models, each produced in an edition of 30 pieces. Together, they articulate a sweet and tangy new vision of watchmaking. Composed of candies, pastries and fruit, these 10 horological treats once again subvert existing conventions, habits and expectations. Drawing on avowed expertise in the area of materials, colour and form, Richard Mille has taken the lid off a candy jar to reveal two kinds of confections for the wrist. Based on three of the brand’s iconic models, the RM 07-03, RM 16-01 and RM 37-01 offer a passage back to childhood with the simple pleasure of slightly regressive and thoroughly tasty memories, to be enjoyed without moderation. ‘The idea was to revisit the existing collections while playing with colour. This allowed me to bring out a pop-inspired sense of fun. In all, we developed a palette of 60 colours for this unisex collection,’ explained Cécile Guenat, artistic director for the collection.

    Foretaste

    Despite its disruptive appearance, the Richard Mille Bonbon Collection is directly descended from earlier Richard Mille creations. Take colour—the brand is continuously expanding its range. Forays into the spectrum of greens, crimson, yellow and even pink are possible thanks to a mastery of materials, many of them exclusive, that is a Richard Mille specialty. The brand’s understanding of how tinted ceramics behave, expertise in layering materials like Carbon TPT® and Quartz TPT® and constant improvements to the setting of coloured gemstones are all ingredients in these confectionary recipes, which are singularly imaginative, playful, distinctive and, most importantly, appetising. Lastly, a finely honed eye for detail makes these 10 models stunning graphic compositions that offer a wealth of shades and textures appearing in every component of the watch. The crowns and some of the caseband, for instance, take the shape of a particular treat, such as a cupcake or gelato.

    Great delights

    The Sweets collection comprises four models, all with two-tone ceramic cases that set off their grand feu enamel or black-chromed titanium confections. The RM 07-03 Cupcake, RM 07-03 Marshmallow, RM 37-01 Sucette and RM 16-01 Réglisse are colourful and delectable, evoking a whole spectrum of flavours. Better yet, the textures you expect to encounter upon biting into these sweets are conjured visually thanks to a mastery of enamelwork that succeeds in evoking sensations like softness, crunchiness, and fluffiness. The creamy quality of the TZP ceramic case is enhanced by the varied matt and polished effects of elements on the dial. Black, a foundational colour in the technical vocabulary of Richard Mille, is presented in a whole new light here, as a giant roll of liquorice that occupies the entire surface of a dial. Here, the most satisfactory solution for obtaining the liquorice shape of the RM 16-01 was a stamping operation, followed by a black chrome coating that lends this piece its spot-on colour and texture.

    Tiny treats

    The Fruits line is a homage to the very concept of sweet temptation in six delectable flavours: Lemon and Strawberry (RM 16-01 Citron et Fraise), Blueberry and Litchi (RM 07-03 Myrtille et Litchi), Kiwi and Cherry (RM 37-01 Kiwi et Cerise). In addition to colour-gradient cases made of Carbon TPT® combined with Quartz TPT® of a different hue for each model is an all-new turquoise colour. Painted in acrylics and lacquered by hand, the 3,000 miniature sculptures integrated in these compositions stand out from the dials, turning each one into a sachet full of tiny candies. To further enhance their realism, a ‘sugar coating’ effect was achieved using powdered enamel and the fine sand employed in hourglasses. Tart jelly ribbons, twisty lollipops, candy citrus segments, gumdrops and other surprises are positioned on plates of grade 5 titanium that are machined and skeletonised like horological components.

    Regressive pleasures

    From velvety marshmallow or custard cream to the crunch of hard candies and lollipops and tangy tartness of citrus quarters… Applying the science of materials and textures to the realm of confectionary, Richard Mille has embarked on a vast collection of delicious and powerfully evocative pieces. Whether in the Sweet or Fruit line, every watch in the Bonbon Collection is mouth-wateringly appetising, and promises a moment of horological extasy.

  • A REBELLIOUS COLLECTION IN ACID-BRIGHT COLOURS


    Richard Mille has bitten into a juicy new realm of graphic, emotional and chromatic expression. The Richard Mille Bonbon Collection comprises 10 models, each produced in an edition of 30 pieces. Together, they articulate a sweet and tangy new vision of watchmaking. Composed of candies, pastries and fruit, these 10 horological treats once again subvert existing conventions, habits and expectations. Drawing on avowed expertise in the area of materials, colour and form, Richard Mille has taken the lid off a candy jar to reveal two kinds of confections for the wrist. Based on three of the brand’s iconic models, the RM 07-03, RM 16-01 and RM 37-01 offer a passage back to childhood with the simple pleasure of slightly regressive and thoroughly tasty memories, to be enjoyed without moderation. ‘The idea was to revisit the existing collections while playing with colour. This allowed me to bring out a pop-inspired sense of fun. In all, we developed a palette of 60 colours for this unisex collection,’ explained Cécile Guenat, artistic director for the collection.

    Foretaste

    Despite its disruptive appearance, the Richard Mille Bonbon Collection is directly descended from earlier Richard Mille creations. Take colour—the brand is continuously expanding its range. Forays into the spectrum of greens, crimson, yellow and even pink are possible thanks to a mastery of materials, many of them exclusive, that is a Richard Mille specialty. The brand’s understanding of how tinted ceramics behave, expertise in layering materials like Carbon TPT® and Quartz TPT® and constant improvements to the setting of coloured gemstones are all ingredients in these confectionary recipes, which are singularly imaginative, playful, distinctive and, most importantly, appetising. Lastly, a finely honed eye for detail makes these 10 models stunning graphic compositions that offer a wealth of shades and textures appearing in every component of the watch. The crowns and some of the caseband, for instance, take the shape of a particular treat, such as a cupcake or gelato.

    Great delights

    The Sweets collection comprises four models, all with two-tone ceramic cases that set off their grand feu enamel or black-chromed titanium confections. The RM 07-03 Cupcake, RM 07-03 Marshmallow, RM 37-01 Sucette and RM 16-01 Réglisse are colourful and delectable, evoking a whole spectrum of flavours. Better yet, the textures you expect to encounter upon biting into these sweets are conjured visually thanks to a mastery of enamelwork that succeeds in evoking sensations like softness, crunchiness, and fluffiness. The creamy quality of the TZP ceramic case is enhanced by the varied matt and polished effects of elements on the dial. Black, a foundational colour in the technical vocabulary of Richard Mille, is presented in a whole new light here, as a giant roll of liquorice that occupies the entire surface of a dial. Here, the most satisfactory solution for obtaining the liquorice shape of the RM 16-01 was a stamping operation, followed by a black chrome coating that lends this piece its spot-on colour and texture.

    Tiny treats

    The Fruits line is a homage to the very concept of sweet temptation in six delectable flavours: Lemon and Strawberry (RM 16-01 Citron et Fraise), Blueberry and Litchi (RM 07-03 Myrtille et Litchi), Kiwi and Cherry (RM 37-01 Kiwi et Cerise). In addition to colour-gradient cases made of Carbon TPT® combined with Quartz TPT® of a different hue for each model is an all-new turquoise colour. Painted in acrylics and lacquered by hand, the 3,000 miniature sculptures integrated in these compositions stand out from the dials, turning each one into a sachet full of tiny candies. To further enhance their realism, a ‘sugar coating’ effect was achieved using powdered enamel and the fine sand employed in hourglasses. Tart jelly ribbons, twisty lollipops, candy citrus segments, gumdrops and other surprises are positioned on plates of grade 5 titanium that are machined and skeletonised like horological components.

    Regressive pleasures

    From velvety marshmallow or custard cream to the crunch of hard candies and lollipops and tangy tartness of citrus quarters… Applying the science of materials and textures to the realm of confectionary, Richard Mille has embarked on a vast collection of delicious and powerfully evocative pieces. Whether in the Sweet or Fruit line, every watch in the Bonbon Collection is mouth-wateringly appetising, and promises a moment of horological extasy.

  • Brand  : Richard Mille
    Collection  : RM 16
    Model  : RM 16-01 Automatic Réglisse
    Reference  :
    Complement : TZP ceramic - Saphir - Rubber Strap
    List Price : On request
    Height : 50.20 mm
    Width : 38.00 mm
    Thickness : 9.88 mm
    Styles : Atypical
    High Horology
    Types : Self-winding
    Calibre distinction : Skeleton
    Variable-geometry rotor
    Complication : Skeleton
    Case material : Carbon
    Carbon TPT®
    Quartz TPT®
    Case peculiarity : Sapphire caseback
    Shape : Tonneau
    Water-resistance : 50 meters
    Dial : Lacquered
    Hand painted
    Skeleton
    Enamelled
    Titanium
    Display : Luminescent hands
    Glass : Antireflective coating
    Sapphire
    Strap material : Rubber
    More characteristics :
    Movement
    CALIBRE RM16-01: Skeletonised automatic-winding movement with hours, minutes, date and adjustable rotor geometry.
    POWER RESERVE: Circa 55 hours (±10%).
    BASEPLATE AND BRIDGES MADE OF GRADE 5 TITANIUM
    DATE DISPLAY
    FREE-SPRUNG BALANCE WITH VARIABLE INERTIA
    VARIABLE-GEOMETRY ROTOR
    DOUBLE-BARREL SYSTEM
    SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE
    - Movement dimensions: 30.25 x 28.45 mm
    - Thickness: 4.44 mm
    - Jewels: 32
    - Barrel arbour: in AP 20 steel
    - Balance: Glucydur®, 4 arms, moment of inertia 4.8 mg•cm2, angle of lift 53°
    - Frequency: 28,800 vph (4 Hz)
    - Balance spring: elinvar by Nivarox®
    - Shock protection: INCABLOC 908.22.211.100 (transparent)
    - Escapement wheel jewels: Rubifix (transparent)
    - Three-position stem: Manual winding, date, time setting

    Case
    TZP ceramic

    Dial
    In grade 5 titanium with grey Titalyt® treatment
    Thickness: 1.40 mm

    CRYSTAL
    Bezel side: in sapphire (1,800 Vickers) with anti-glare treatment (2 sides)
    Thickness: 1.15 mm
    Caseback: in sapphire with anti-glare treatment (2 sides)
    Thickness: at the center 0.67 mm and outer edges 1.05 mm

    FINISHING
    MOVEMENT
    - Baseplate and bridges in hand-ground grade 5 titanium, wet sandblasted, electroplasma treated or Titalyt® treated
    - Burnished pivots
    - Sandblasted bridges
    - Diamond-polished sinks on the bridge side

    STEEL PARTS
    - Sapphire-blasted surfaces
    - Anglage and polishing by hand
    - Screw slot and screws bevelled and polished with rounded and polished tip

    WHEELS
    - Sandblasted and rhodium-plated, bevelled wheels (before cutting the teeth)
    - Minimal corrections applied to the wheels in order to preserve geometry and performance